HomeMy WebLinkAbout8.112 PLANT ELECTRICAL ELECTRONIC EQUIPMENT REPAIRER 20230308PART I DEPARTMENT OF HUMAN RESOURCES
COUNTY OF KAUAI 8.112
Class Specifications for the Class:
PLANT ELECTRICAL/ELECTRONIC EQUIPMENT REPAIRER
BC-12, BU-01
Duties Summary:
Independently installs, maintains, overhauls and repairs plant electrical and
electronic control devices and equipment; and performs other related duties as required.
Distinguishing Characteristics:
This class is distinguished by its responsibility to independently install, maintain,
overhaul, and repair plant electrical and electronic devises and other equipment.
Examples of Duties: (The following are examples of duties and are not necessarily
descriptive of any one position in this class. The omission of specific duties statements does
not preclude management from assigning such duties if such duties are a logical
assignment for the position).
Installs, maintains, overhauls and repairs plant electrical and electronic devises and
equipment such as switching devices, solid state and selenium rectifiers, resistors,
capacitators, relays, temperature controls, pressure switches, high and low voltage
switchgears, motor control centers, motors, generator, overhead cranes, and
distribution, power current control and lighting transformers, etc.;
Installs maintains, and repairs power lighting, electrical and electronic circuits,
conduits, electrical outlets, meter loops, underground high and low voltage wiring,
pole and line wiring, power transfer switching equipment, mercury vapor and
fluorescent lighting, photocell controls, etc.;
Inspects and tests equipment for shorts, grounds and open circuits and diagnoses
faulty circuits;
Identifies, isolates, and corrects defective circuits;
Renews and repairs defective parts and fabricates various parts using materials of
appropriate conducting, resistance and/or insulating properties;
Performs shop and bench work in the overhaul, repair, testing and calibration of
equipment and components;
Maintains and repairs devices on overhead traveling cranes;
PART I
PLANT ELECTRICAL/ ELECTRONIC
EQUIPMENT REPAIRER
2
8.112
Installs, maintains, overhauls, repairs, and calibrates electrical and electronic
laboratory and field instruments;
Reads and interprets wiring diagrams and schematics;
Modifies electrical and electronic circuitry for proper operational needs;
Estimates material requirements;
May assist in overseeing the work of helpers, apprentices, and others;
May operate a motor vehicle; and
Performs other related duties as assigned.
Knowledge of:
The theories of electricity and electronics; practices, tools, equipment, instruments,
and materials used in electrical and electronic repair; installation, maintenance, testing and
repair of electrical and electronic control devices and equipment; and hazards and safety
practices of the trade.
Ability to:
Read and interpret blueprints, plans and diagrams of electrical/electronic circuits;
install, maintain and repair electrical and electronic control devices and equipment; use
electrical and electronic testing equipment and devices; work with dexterity and safety;
follow oral and written instructions; and handle weights loads.
This is an amendment to the specification for the class, PLANT ELECTRICAL/
ELECTRONIC EQUIPMENT REPAIRER, which was approved on October 21, 1993, amended
on August 23, 2021, and is to be substituted for that specification.
Approved: March 8, 2023
(date) ANNETTE L. ANDERSON
Director of Human Resources
PART II DEPARTMENT OF HUMAN RESOURCES
COUNTY OF KAUAI 8.112
Minimum Qualification Specifications
for the Class:
PLANT ELECTRICAL/ELECTRONIC EQUIPMENT REPAIRER
BC-12, BU-01
Training & Experience:
A combination of education and experience substantially equivalent to graduation
from high school; and
six (6) months of journey level experience in the installation, maintenance, and repair
of plant electrical and electronic equipment, instruments, and devices.
Substitutions Allowed:
The following may be substituted for education:
A. Four (4) years of full-time general work experience may be substituted for a high
school diploma.
B. Successful completion of semester credits leading towards a degree or diploma from
an accredited community college, college or university, trades school, etc., may be
substituted for up to four (4) years of the education requirement (15 semester
credits = 6 months).
C. An Associate’s, Bachelor’s, Master’s or PhD degree from an accredited community
college, college or university, trades school, etc., may be substituted for the
education requirement.
If a degree is used to substitute for the education requirement, it may not be used
again towards the experience requirement. If work experience is used to substitute for
education, it may not be used again to meet the experience requirement. If the applicant
holds more than one degree, transcripts must be provided, and a thorough review will be
conducted by the DHR staff in order for more than one degree to be credited towards the
minimum qualification requirements. Additional degrees can be considered if obtained
independently through mutually exclusive classes from another degree being considered.
Substitutions will be used to the advantage of the applicant.
Quality of Experience:
Possession of the required number of years of experience will not in itself be
accepted as proof of qualification for a position. The applicant's overall experience must
have been of such scope and level of responsibility as to conclusively demonstrate that
PART II
PLANT ELECTRICAL/ ELECTRONIC
EQUIPMENT REPAIRER
2
8.112
he/she has the ability to perform the duties of the position for which he/she is being
considered.
License Requirement:
Possession of a State of Hawai'i journey electrician's or industrial electrician's
license; possession of a valid motor vehicle operator license (Hawaii Type 3 or equivalent).
Selective Certification:
Specialized knowledge, skills and abilities may be required to perform the duties of
some positions. For such positions, Selective Certification Requirements may be established
and certification may be restricted to eligibles who possess the pertinent experience and/or
training required to perform the duties of the position.
Agencies requesting Selective Certification must show the connection between the
kind of training and/or experience on which they wish to base selective certification and the
duties of the position to be filled.
Tests:
Applicants may be required to qualify on an appropriate examination.
Health and Physical Condition Requirements:
Persons seeking appointment to positions in this class must meet the health and
physical condition standards deemed necessary and proper to perform the essential
functions of the position with or without reasonable accommodations.
Physical Effort Grouping: Heavy
This is an amendment to the specification for the class, PLANT ELECTRICAL/
ELECTRONIC EQUIPMENT REPAIRER, which was approved on October 21, 1993, amended
on August 23, 2021, and is to be substituted for that specification.
Approved: March 8, 2023
(date) ANNETTE L. ANDERSON
Director of Human Resources